0
simply remove the bolts that hold the blades to the mower.check and make a note of the blades positions/there's an 'up' and 'down'-[ 'down' faces the lawn] put something,-ratchet handle, 2x4- to keep the blade[s[ from turning and remove the retaining bolt[s]replace the new blade[s] facing the proper direction-if in doubt,ask a dealer-they may laugh,but it's importent. hope this helps. It would help more if I knew which direction the bolts turn, reverse or normal on a twin blade 38" deck?
I believe the size head for the bolt is a 5/8 socket, you will probably need a cheater bar for leverage to help get the bolt loose from the blade spindle. Or a hammer to tap the handle of socket. Make sure you lube the spindles when putting things back together. The lube points are on top of deck around the 3 spindles on most decks !
What else can I help you with?
How do you adjust the brake on an John Deere stx 38 mower?
Remove the deck from the tractor, then remove both blades. They can be sharpened using a grinder. If you don't have a grinder, then there are shops out there that can sharpen them for you (try asking at a shop that sharpens chainsaw chains).
How do you put lawn mower blades on my john deere lawn tractor - left turn to unscrew blades or right turn?
the treads are stander so it will left for lossen and right for tighten
How do you adjust transmission belt on a sx95 john deere mower?
what size nut is on the blades on a john deere z225 42 in mower
How do you remove a 60 inch mower from a John Deere 420?
To remove a 60-inch mower deck from a John Deere 420, start by parking the tractor on a level surface and engaging the parking brake. Disconnect the mower deck's lift linkages and any drive belts, then remove the pins or bolts securing the deck to the tractor. Finally, lower the deck to the ground and carefully slide it out from under the tractor. Always refer to the owner’s manual for specific instructions and safety precautions.
LX188 John Deere lawn tractor quits after 30 minutes what causes the engine to overheat?
i had high lift blades on my mower & it would overheat. i put regular blades on it & problem went away. could be your problem
Size of wrench needed to change mower blades on a LA100 john deere mower?
Do you seriously not have a few to try?!?
Why won't engine start after engine stopped with blades engaged this is a john deere riding mower.?
Turn your blades off.
How do you remove the deck on a John Deere stx38 lawn tractor?
Is your STX 38 a black deck or yellow mower deck color?? Bob Lituri lituri54@aol.com
What does the number mean on a john deere horse drawn mower?
1 #5 was the first tractor drawn
What attachments are available for the John Deere 240 Tractor?
The attachments for a John Deere 240 tractor are a 38" mower deck, 46" mower deck, blade and a 42" snow blower. You can find a complete listing of these attachments here: http://www.tractordata.com/lawn-tractors/000/0/2/26-john-deere-240-attachments.html
How do you know if your coil is bad on john deere lawn mower?
Lt133 lawn tractor will not fire is coil bad
Belt diagram for a John Deere 62C mower deck it shaft drive on a X595 tractor with 4x4?
yes
