It's easiest to simply replace the overrunning clutch rather than try to repair it at home. And rather than paying well over a hundred dollars to a Harley dealer for the part, I recommend you buy from a non-boutique and save a lot of money.
Harley's starter is made by Nippondenso and is found on numerous small cars including Toyota. Do a web search for any of these part numbers and you'll be surprised at the difference from Harley's price.
Toyota part #0283010010
WAI part #54-82401
NAPA Auto Parts #4-1071
The starter will not come out until the primary is removed and the started shaft bolt as well. If you are mechanically inclined, i urge you to purcahse the reapir manual. It is your best friend when doing such repairs.
It is behind the mud cover in front of the rear wheel
There's a clutch on the starter that acts like a Bendix gear on a car. This clutch is stripped out on your bike. You'll need to pull the starter to replace it.
What is the proper adjustment for a 2004 Heritage Softtail Clutch. It seems I am releasing the handle 2/3 of the way out before clutch engadges. What is the proper procedure for adjusting the clutch
About $5,000
heritage classic or heritage softail classic is the same..only bike different is the heritage springer which has the springs on the front under headlamp
There are 5 different maqjor types of Harley Davidson Motorcycles.
Remove the starter. the solenoid is mounted on the starter.
under the Seat
14265
FLSTC Heritage Classic
8 lbs