To replace the spark plug on a 2004 Polaris Sportsman 700, first, ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Before installing the new spark plug, check the gap and adjust if necessary. Finally, insert the new spark plug, tighten it securely, and reconnect the spark plug wire.
ignition wiring diagram 2004 Polaris Sportsman 600
On top of the cylinder head directly under the fuel tank.
buy the owners manual, the sportsman 600 & 700 should use rc7yc and they should be gaped at .035" (.90 mm)
step on the foot brake. then pull the shift lever to the desired gear.
the spark plug is located directly under the gas tank, If you pull off the left side pannel you wlll be able to see the wire.
2004 polaris sportsman 400 has new starter, battery and selenoid but still won't start what else can it be
About 1300 RPM's
differentiel avant
5,000,000 dollars
you would use polaris specified AGL fluid in the transmission
if its water cooled it has a water pump!
There is no valves as it is a 2-stroke engine .