0
Their are 2 basic adjustments,throttle stop screw and air/fuel mixture, asumeing the float bowl and needel vale are adjusted proporly(wich are already set when you buy a new carb) start with lightly seating the two screws all the way in,turn out 1 1/4, thats the standard setting,for fine tune adjustments i suggest your local shop.
What else can I help you with?
Yamaha raptor 80?
what year was the Yamaha raptor 80 introduced?
1975 Yamaha yz 80 points gap set?
To set the points gap on a 1975 Yamaha YZ 80, you'll want to adjust the ignition points to a gap of approximately 0. points to ensure proper ignition timing. This can typically be done by removing the flywheel and using a feeler gauge to measure the gap as you rotate the engine to the correct timing mark. Always refer to the specific service manual for exact specifications and procedures for your model.
What are the specs on a Yamaha big wheel 80?
what should the compression be on a yamaha big wheel 80
What is the valve clearance on a Yamaha 80cc quad?
The valve clearance for a Yamaha 80cc quad, specifically the Yamaha Raptor 80, is typically set at 0.10 mm (0.004 inches) for both the intake and exhaust valves. It's essential to check and adjust the valve clearance regularly to ensure optimal engine performance and longevity. Always refer to the specific service manual for your model for precise specifications and procedures.
Is a Yamaha pw-80 the same as a jianshe 80?
no
What is the head torque for a Yamaha badger 80?
What do you torque head on Yamaha
Will Yamaha yz 85 parts fit a Yamaha yz 80?
so of them will
How fast is a Yamaha Blaster?
a Yamaha blaster can go around 75-80
What is the top speed of 2005 Yamaha 80?
80 to 90 mph
How fast is a Yamaha grizzly 80 ATV?
The yamaha grizzly 80 goes 38 mph I have one and it says it in the instruction manual.
How fast does a Yamaha pw 80 go?
stock goes maybe 40-50 km/h but if you have new reeds, filter, take off all of the limitors, and jet the carb, you can get it going to 90 km/h
How much is 20 gram of carb?
80 calories
