For 2008:
Turn Key To Accessories
If necessary, push button on console until you see the click.
Press and hold console button for 5 seconds.
1st option is for 12hr/24hr clock.
Click once to choose between then.
Press and hold button for 5 seconds, clock will return with hour blinking.
Click button to the desired hour.
Press and hold button for 5 seconds, minutes will blink.
Click button to the desired minutes.
Press and hold button for 5 seconds to save.
To set the clock on a 2013 Harley Davidson Softail, first, turn the ignition to the "On" position without starting the engine. Press and hold the "Trip" button until the clock display begins to flash. Use the "Trip" button to adjust the hours and the "Reset" button to adjust the minutes. Once set, press the "Trip" button again to save the changes.
Greg Field has written: 'The end of this set' 'Harley-Davidson Panheads' -- subject(s): Harley-Davidson motorcycle, History 'Harley-Davidson Softail (Motorcycle Color History)' 'Original Harley-Davidson Panhead' -- subject(s): Harley-Davidson motorcycle, History, Conservation and restoration, Design and construction 'Moto Guzzi big twins' -- subject(s): Moto Guzzi motorcycle, History 'Harley-Davidson Knuckleheads' -- subject(s): Harley-Davidson motorcycle, Motors, History
To set the clock on a 2007 Harley Davidson, first, turn the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the hours begin to blink, then use the "Set" button to adjust the hours. After setting the hours, press the "Clock" button again to switch to minutes and adjust them using the "Set" button. Finally, press the "Clock" button once more to save your settings.
Well on my 2004 softail Pushing the remote button 1 time set the alarm and pushing the twice deactivates the alarm
http://shopping.rediff.com/product/legendary-deodorant-by-harley-davidson-set-of-3/11391980
Your Harley Davidson Screaming Eagle keep radio keep shutting off because it is not set up correctly.
A Harley Davidson twin cam Fat Boy should be set with a gap of .40 inches. This is equal to 10 mm.
As soon as you turn on the ignition, make sure that the radio is off. Turn the ignition switch back off until the display goes off and turn it back on, then just push the hrs or min button to set the time.
One can contact the Harley Davidson financial office by going to their site and logging in to their own account or set up their own account. Inside their account they can do the payment, view their account and print their own statement.
visit them at: http://www.wyotech.edu/program/motorcycle-technology/specialty/harley-davidson about them: The Motorcycle Technology program is designed to provide students with a technical skill set and applied logical diagnostics approach to diagnose, service, and repair modern motorcycles.
If it's points or a Dyna S ignition you set the plugs at 28, other wise you set the plugs between 38 - 40
it should tell u on the side of the tire, it will be a max pressure so set it about 5 lbs lower than it says