how do you set the timing on a polaris 500 atv
timing marks on a 97 polaris 500 magnum 4x4 atv
Setting the timing on a Polaris 500 Sportsman is not a hard process. First someone should go to the menu and pick the timer function. Then, choose the time the time someone desires.
To set the timing on a 2003 Polaris 330 Magnum, first ensure the engine is at top dead center (TDC) on the compression stroke for the number one cylinder. Remove the timing cover to access the timing marks on the flywheel and the stator. Align the timing marks according to the specifications in the service manual, adjusting the stator if necessary. Finally, reassemble the cover and verify the timing by checking engine performance.
i need to find out how to set the timing on a Yamaha xt 500
It is set to zero with a scan tool. It can not be done with a timing light.
The distributor is set to 0 degrees with a scan tool. It can not be done with a timing light.The distributor is set to 0 degrees with a scan tool. It can not be done with a timing light.
How do yuo set firing order 92 mercedes 500 sl
It may be that the idle is set at max rpm on your carberator
The initial timing is set and controlled by the vehicle's PCM (Powertrain Control Module). DO NOT try to set the timing by moving the distributor. The distributor is used to index and synch the fuel injection timing on 3.9/5.2/5.9 liter Magnum engines.
The spark plug gap for a Polaris Indy 500 should be set between .025 and .028 inches. A new spark plug should need no adjustments as they come preset from the factory.
what timing are you trying to set? the cam timing or the ignition timing?
Two correct answers:You don't, 100% controlled by the computerTake car to a "Re-programer" and ask him to re profile timing. Costs between $300 and $500