If you cannot shift into first gear on a motorcycle, you should not ride one.. So says the spida. But if you must, click down and you are in first. 2,3,4,5 are all up after that. neutral is a fragile click in between 1 & 2.
rev first gear out to 10,000rpm, then grab clutch, and shift up
clutch in, press down on the shift lever for first, up for 2-6
First gear down, the next four are pulled up.
To downshift motorcycle is squeeze the clutch and shift to the next lowest gear, release the clutch.
Most likely a bent shift fork.
check the pressure spring and arm on the end of the shift drum, or the gear lever is not moving far enough (obstruction somewhere)
Between 1st and 2nd gear.
It depends on the motorcycle. Almost all (if not all) motorcycles in mass production now (if they have foot gear change) have the gear change on the left.
You shift just like any other motorcycle with a manuel gear box. It is the standard 1 down 4 up or 5 up pattern.
repair stripped motorcycle gear shift
The shift pattern for a 2001 Yamaha TTR 125 is a standard motorcycle configuration, which is one down for first gear and neutral, followed by four up for the higher gears. This means you shift down to engage first gear, and then shift up sequentially to reach second, third, fourth, and fifth gears. The neutral gear is located between first and second. Always ensure to use the clutch when shifting to maintain smooth transitions.
manual stick shift BMW what cause to shke when i change in to the first gear