0
There are 2 Allen key bolts at the rear of the seat. One on each side, just above the shocks. Remove them, then push the seat forward so that it will slide out of the clip under the front of the seat. If you cannot slide the seat, then there are 2 more bolts around the middle of the seat tucked up a little. Then remove them.
What else can I help you with?
How much oil does a 1995 Honda Goldwing SE take?
According to the manual = 3.9 US qt.
How do you clean a carburetor for a 1982 Honda goldwing?
If they are really gummed up, best to take them off ( 4 ) .
How do you change the oil in a 2005 Honda GoldWing?
Take front fog cowling off. remove drain plug, and remove oil filter.
How do you replace spark plugs on a 93 1500 Honda goldwing?
I know how to replace the plugs, but what do you have to take off on the fairing to get to the plugs. Thanks steve
What type of transmission fluid does a 1978 Honda goldwing take?
GL 1000, 5 speed, with clutch. The engine oil is all you need.
How do you change a low beam headlight on a 2006 Honda Goldwing?
get a new light bulb ,take the cover off the light bulb that's broken and replace it.
Where is the slave cylinder and bleeder valve on 1985 Honda goldwing?
Look at the back of the engine where the clutch line goes in the engine. 3 bolts to take out and it's in your hand.
What type of gas does a Honda TRX125 1986 take?
Just regular gas.
How much motor oil does a 1986 Honda CRX take?
3.7 quarts.
What kind of oil does my 1986 Honda TRX 200 take?
1.6 quarts
1997 Honda goldwing 1500 Where is the coil located?
located forward under tank compartment, gotta take off some plastic to do this job, rate it a 4 out of 5 hammer job
Fuel shutoff on a 1986 GL 1200 sei Goldwing?
right hand side take off the covers about mid engine one will find a brass or heavy aluminum dial.
