To tighten the chain on a 2003 Polaris Predator 500, first, lift the rear end of the quad to relieve tension on the chain. Locate the adjuster bolts on both sides of the swingarm and loosen the axle nut. Turn the adjuster bolts evenly on both sides to achieve the desired chain tension, ensuring it has about 1 inch of slack. Once adjusted, re-tighten the axle nut and check the tension again before lowering the quad.
2003
2003 Polaris Predator 90
http://www.hdtalking.com/transmission_clutch_and_primary/3173-how_to_adjust_primary_chain_video.html Try this website it is a video that features the 2003 road king, chain tighten and fluid change
Its a sticker on the frame, Right side above a-arms.
The fuse for a 2003 Polaris Predator 500 is typically located near the battery, often in a fuse box or holder. Check under the seat or near the rear of the ATV where the battery is situated. If you have trouble locating it, refer to the owner's manual for specific diagrams and details. Ensure the ATV is turned off and the battery is disconnected before inspecting the fuse.
Loosen the top two bolts on the swing arm, after tighten the two bolts on the rear of the swing arm until you have 1.5"-2" of slack. Tighten the top bolts back up and good to go
Predator Bay - 2003 TV was released on: USA: 2003
where is the vin number on a 250cc polaris trailblaizer 2003
Predator's Gold was created in 2003.
Shorter Wheel Base, Wider Track, Transmission (5 Speed w/No Reverse), Suspension. Overall a better more stable platform. (NOTE: 2005 Predator added reverse.) they dont have 5th gear, if so i cant find mine???
Deadly Predator Vengeance - 2003 was released on: USA: 9 October 2003 (internet)
what are the cylinder head and crankcase torque specs. for a 2003 Polaris 500