answersLogoWhite

0

undo pinch bolts, rotate cam clockwise (that's the big housing that the axle runs through) and tighten pinch bolts again.

Its not a cam its called the carrier and you would turn towards the front of the ATV to tighting, still allow the chain to have some slack 3/4 inch

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do I tighten the drive chain on a Honda 400 ex?

Follow the Youtube video.


How do you tighten the drive chain on a suzuki 250 quadrunner 2wd?

how do i adjust the chain on a Suzuki 230 quad runner


Drive chain specs for a 1986 Honda rebel?

it's a 520 o-ring chain at 108 links


Is it a chain or a difenrential in a 1989 Honda fourtrax 300?

Differential with a drive shaft.


What is the drive chain size for 1981 HONDA CB 750K?

chain size is 630 pitch, o-ring style chain recommended


How do you tighten a drive chain on a suzuki gz 125?

To tighten the drive chain on a Suzuki GZ 125, first, place the motorcycle on a level surface and ensure it's stable. Locate the rear axle adjustment bolts on each side of the swingarm, and loosen the axle nut. Using a spanner, turn the adjustment bolts evenly to tighten the chain until it has about 20-30 mm of slack at the midpoint. Finally, re-tighten the axle nut and check the chain tension again to ensure it’s within the recommended range.


What is the Honda cm250 chain size?

The size of the chain that goes on a Honda cm 250 is 104 links. The cm 250 originally had a belt drive, but the belts have been discontinued.


What is the drive chain size for a 1983 Honda 480cr?

The CR480 runs a 520 non O-ring chain from the factory.


Is the 2005 Honda VT1100 Shadow Sabre Shaft Drive or Chain Drive?

The 2005 Shadow Sabre is Shaft Driven


How do you tighten drive chain on tao tao 110cc ATV?

To tighten the drive chain on a Tao Tao 110cc ATV, first, locate the adjustment bolts on the rear axle. Loosen the axle nuts slightly, then turn the adjustment bolts evenly on both sides to increase chain tension. After achieving the desired tension, re-tighten the axle nuts securely. Finally, check the chain's slack to ensure it's within the recommended range before testing the ATV.


How do you tighten the drive chain on an 1999zx11?

To tighten the drive chain on a 1999 Kawasaki ZX-11, first, place the motorcycle on a stable stand to ensure safety. Loosen the rear axle nut and then adjust the chain tension by turning the adjustment bolts located on each side of the rear swingarm, ensuring both sides are adjusted evenly. Check the chain tension by measuring the slack; it should be within the manufacturer's specified range. Once adjusted, re-tighten the rear axle nut and double-check the chain tension to ensure it’s correct.


Does a 1992 Honda Accord have a timing chain or timing belt?

this engine has a belt drive timing system