answersLogoWhite

0

Read your owners manual. :) Just kidding. You loosen the rear end clamps, tighten the adjuster screws while you have somebody of equal weight sit on the bike. Tighten until there is approximately 1/2 inch of up and down slack in the chain. Lastly , tighten the rear end bolts. Good luck. :)

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Where can you find a wiring diagram for a 90 Honda trx 300?

A Honda TRX 300 Service Manual.


Is a predator 90 faster than a Honda trx 90?

NO.. a predator is faster


What type of oil for a Honda trx 90?

5w 20


Best racing four wheeler for a 14 year old?

Honda trx 90


How fast does the 2008 Honda Trx 700 xx go?

Its goes 90 Out of the box. That's what I was told by my local Dealer.


Clutch torque specs?

what is the torque for the bolts on the clutch springs for a trx 90/>


What type of vehicle is the Honda S90?

The Honda S90 or Honda Sport 90 or Super 90 was a 90 cc Honda motorcycle. It had a single cylinder OHC air-cooled engine linked to a four speed transmission.


How much a shot of chain weights?

A shot of chain is 90 feet. The weight of 90 feet of chain will depend upon the type and guage of chain.


How fast is a Honda 90 ATV?

i have 2 Honda 90 at a farm i ride them alot they do 40 mph


What are the torque wrench settings for a 2000 Vuaxhall Corsa 1.6 sport cylinder head settings?

stage one 25Nm stage two tighten a further 90 degees stage three tighten a further 90 degrees stage four tighten a further 90 degrees stage five tighten a furthe 45 degrees


What are the cylinder head torque settings for a Fiat Punto 60?

firstly tighten in sequence to 20Nm all round, then tighten to 30Nm all round,then tighten 90 degrees all round, and finally tighten a further 90 degrees all round. good luck!.


Troubleshoot 90 Honda Accord that at surgs at idle?

'90 Honda Accord will start but shut off. What could this problem be?