To wire a motorcycle amp to your motorcycle, first disconnect the battery to ensure safety. Next, connect the amp's power wire to the motorcycle's battery, usually via the positive terminal, and attach the ground wire to a clean, bare metal surface on the frame. Then, connect the speaker wires from the amp to the motorcycle's speakers, ensuring proper polarity. Finally, reconnect the battery and test the amp to ensure everything is functioning correctly.
you put the ground wire in ur head, and the red one on a battery
what kind of power wire?(a power wire for an amp maybe) what kind of power wire?(a power wire for an amp maybe)
Since the resulting short circuit would be outside the amp, it WOULD NOT blow the amp.
remote wire is to control amp, bass coming from subs, and the frequency
You can wire and amp down to 0.3 ohms by decreasing its windings.
The amp rating for 10 wire is typically around 30 amps.
The amp rating of an 18AWG wire is typically around 16 amps.
The recommended wire size for a 20 amp breaker is typically 12-gauge wire.
The recommended wire size for a 30 amp circuit is typically 10 gauge wire.
The recommended wire size for a 60 amp circuit is typically 6-gauge wire.
The appropriate wire size for a 20 amp circuit is typically 12-gauge wire.
The appropriate wire size for a 25 amp breaker is typically 10 gauge wire.