answersLogoWhite

0

Best guess is about 200cc. Little bit more or less depending on engine design. Displacement does not directly translate into HP.

Bad best geuss...5.0 =158cc and 190cc is a 6.75hp

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How many hp in a 190 cc motor?

190 cc. is about 5 hp.


How many hp in a 175 cc?

5


How many hp in a 99 cc engine?

3.3 HP


How many cc is 5 hp scooter?

A 5.8 hp scooter is 60 hp.


How many hp is 208 cc?

5-7


How many cc is in 1 horsepower?

16.38 cc=1 cu in. and depends on the effenceny of the motor.Could be from 5 cc to 32 cc per hp.


How many horsepowers are in 179 cc enigine?

Around 4/5 hp.


How much is 75cc convert to hp?

To convert cubic centimeters (cc) to horsepower (hp), you can use a rough estimate that 1 hp is equivalent to about 15 cc for small engines. Therefore, 75 cc would be approximately 5 hp (75 cc ÷ 15 cc/hp = 5 hp). However, this is a general approximation and actual horsepower can vary based on engine design and efficiency.


How many horse power does a 206 cc engine generate?

5 hp


How many cc's is 5.0hp?

Typical new carbureted engine well tuned:1 x HP per each 25 ccso 5 hp would be 125 ccFuel injected:1 x HP per each 22 ccso 5 hp would be 110 cc


How many hp is 208 cc motor?

The horsepower of a 208cc motor can vary depending on the specific design and efficiency of the engine. However, as a general rule of thumb, a 208cc motor typically produces around 5 to 7 horsepower. It's important to note that horsepower is not solely determined by engine displacement (cc), but also by factors such as engine design, compression ratio, and fuel intake system.


How many cc in a 5 hp engine?

The displacement of a 5 hp engine can vary depending on its design and application, but a common approximation is that a 5 hp engine typically has a displacement of around 150 to 200 cc. For small engines, such as those used in lawn mowers or generators, this range is often sufficient. However, the exact cc can differ based on the engine's efficiency and configuration.