The displacement of a 6.5 horsepower (hp) motor can vary depending on its design and type (e.g., two-stroke or four-stroke). However, a typical 6.5 hp gasoline engine is often around 196 cc. It's important to check the specific manufacturer's specifications for the exact displacement, as it can differ between models.
190 cc. is about 5 hp.
roughly 342 cc's to a 12 hp engine
Depends on how it's tuned
The cubic centimeters (cc) of a 9 horsepower (hp) motor can vary based on the engine's design and efficiency. However, a rough estimate is that a typical 4-stroke gasoline engine produces about 1 hp per 15 cc. Therefore, a 9 hp motor would be approximately 135 cc. For 2-stroke engines, the cc per hp ratio is generally lower, so the cc might be less than that.
how many cc is a 13 hp
CC can vary between 15 and 17 cc per horse power, so a 3 horsepower motor has a cc of about 48 cc.
you can convert cubic inches to cc's but not horse power. an engine with say 65 cc's can have different amounts of horse power depending on carberation, pistons, valves etc. etc. etc. but my 65 cc engine does have 1.89 hp if that helps.
To convert horsepower (hp) to cubic centimeters (cc), you need to know the specific engine design and efficiency, as there is no direct conversion. However, a rough estimate is that a typical engine may require about 15-20 cc per horsepower. Therefore, a 153 hp motor could be estimated to have between approximately 2,295 cc and 3,060 cc, depending on the engine type and its efficiency.
The displacement of a 7 horsepower (hp) motor in cubic centimeters (cc) can vary depending on its design and efficiency. However, a rough estimate for a small engine is that 1 hp is approximately equivalent to 15 cc. Therefore, a 7 hp motor would typically have a displacement of around 105 cc, but this can vary based on the specific engine's characteristics.
I understand that a 250 cc engine is around a 15 hp motor, so a 277 cc engine calculates about 16.5hp. there is no direct conversion between cc and hp because cc is a volume and hp is a energy.
13.6
hp is the power output of a motor cycle, and stands for horse power.as for cc, this means cubic centermetres, and is used to measure the size of the engine i.e 50cc