In a four-stroke engine, one complete cycle consists of four strokes: intake, compression, power, and exhaust. This cycle requires two complete revolutions of the crankshaft, which equals 720 degrees of crankshaft rotation. Therefore, 720 degrees of crankshaft rotation are needed to complete the four-stroke cycle.
720 degrees
720 degrees
In a straight-six (I6) diesel engine, each cylinder fires once every two revolutions of the crankshaft. Since there are six cylinders, it takes a total of 720 degrees of crankshaft rotation (360 degrees for each complete revolution) to fire all cylinders. Therefore, all cylinders fire once in 720 degrees of crankshaft rotation.
The crankshaft does 2 full turns to make 1 cycle in a 4 cycle engine so, 4 is the answer.
The bearings on the crankshaft are worn out. A complete engine overhaul is needed.
The number of degrees in the angle needed to complete a right angle 45 is its own complementary angle. == ==
It depends on the type of engine. In a four-stroke engine, there are four strokes - intake, compression, power (combustion), and exhaust - required to complete one full rotation of the crankshaft. In a two-stroke engine, there are two strokes - compression/ignition and exhaust - needed to complete one rotation.
The crankshaft is the part that connects the flywheel and the piston rods on an internal combustible engine. Its job is to change the movement of the pistons to a circular motion, which is what is needed to power a vehicle.
* *
There are actual degrees in "Game design" or similar degrees in University.
13 degrees below zero? 13 degrees below freezing? Clarification is needed.
None are required