I was told be the dealer that it is 3 liters(=3.17 quarts).
The 1500 Kawasaki Vulcan typically requires about 3.5 quarts of oil when performing an oil change with a new oil filter. If you're just changing the oil without replacing the filter, it usually takes around 3 quarts. Always check the owner’s manual for the most accurate specifications and recommendations for your specific model.
The 2006 Kawasaki Vulcan Nomad 1600 has an oil capacity of approximately 4.0 quarts (or about 3.8 liters) when equipped with a new oil filter. If you're changing the oil without replacing the filter, it will hold around 3.5 quarts (or about 3.3 liters). Always check your owner's manual for the most accurate specifications.
It takes almost exactly a gallon. Just did my oil change on a 2006 Kawasaki Vulcan Classic 900. It was just over a gallon, but a gallon worth was good enough.
For a 2002 Kawasaki Prairie 400, the oil capacity is approximately 2.1 quarts (or about 2 liters) when including the oil filter change. If you're just changing the oil without replacing the filter, it will be around 1.9 quarts. Always check the owner's manual for the most accurate specifications and recommendations.
5 quarts with filter change. 4 quarts without.
4 to 5 gallons
05 Kawasaki Prairie 360 how many quarts of oil
4 Gears 1 Down 3 Up
With engine oil filter change : 4.5 quarts for the 3.0 L - Vulcan - V6 engine 5.5 quarts for the 3.0 L - DOHC - Duratec - V6 engine according to the owners manual
The owner's manual for the Vulcan 3.0 L says 4.5 quarts. but I just put 6 quarts in to get it up the dip stick line. Buy 2 jugs of oil and fill it to the indicated level.
3.1415927
According to the 2002 Mercury Sable Owner Guide : With engine oil filter change : The 3.0 liter " Vulcan " V6 engine takes ( 4.5 U.S. quarts of 5W-20 ) The 3.0 liter " Duratec " V6 engine takes ( 5.5 U.S. quarts of 5W-20 )