if 10 to 1 is 1 ltr of oil for every 10 ltr of fuel then math is easy 5 ltr of fuel would get .5 ltr or one half liter of oil.
If you buy Yamalube, it will tell you on the label what the ratio is.
250ml
125ml
it would be 200ml of 2 stroke oil for 5 liters of gas
Around 300 ML
It's 100mm of oil Required
1/30th of a liter, or approximately 33ml.
How much oil for gallons to mixt for jhonson Oceanrunner 200 HP
To mix 2-stroke oil with petrol, the standard ratio is typically 50:1, meaning 50 parts petrol to 1 part oil. For 25 litres of petrol, you would need 500 millilitres (or 0.5 litres) of 2-stroke oil. If your engine requires a different ratio, such as 40:1 or 32:1, adjust the amount of oil accordingly. Always refer to your engine's manual for the correct mixing ratio.
The amount of compression in a cylinder in an internal combustion engine typically ranges from 8:1 to 12:1. This ratio represents the difference in volume between the cylinder when the piston is at the bottom of its stroke (largest volume) and when it's at the top of its stroke (smallest volume). This compression ratio affects the engine's efficiency and performance.
To achieve a 32:1 ratio with 1 gallon of gasoline, you would need to mix 4 fluid ounces of 2-stroke oil with the gasoline. This results in a ratio of 32 parts gasoline to 1 part oil.
When mixing 2 stroke oil , the oil to gas ratio should be on the bottle . Different brands of oil mix different . But the bottle should tell you how much oil to gas to get the 32-1 mix that you want .