The 1984 Yamaha YZ125 typically requires about 10.6 ounces (or 315 milliliters) of fork oil per leg. It's important to use the correct viscosity, usually 10W or 15W, depending on your riding style and conditions. Always check the owner's manual for specifics, as fork oil levels can vary slightly based on modifications or individual preferences.
For a 2001 Yamaha YZ125, it's recommended to use 10-weight fork oil. The capacity for each fork leg is approximately 400cc, but it's essential to check the owner's manual for specific measurements and settings, as they can vary slightly. Ensure to replace the oil regularly to maintain optimal suspension performance.
352cc of 10wt fork oiul
3.7
qt fork oil and type oil for the front fork on each side
According to the Yamaha Service Manual 17.6 US oz/18.3 Imp oz per fork is the standard capacity.
Each front fork holds: 400cm3 or 14.1 oz or 13.5 US oz.
I think 1L to 1.5L will be the quantity.
For a 1996 Yamaha YZ125, the recommended fork oil capacity is typically around 500cc (or about 16.9 ounces) per fork. It's crucial to ensure you measure the oil correctly and check the specific manual for your model, as variations may exist. Additionally, consider the desired ride characteristics and adjust the oil level slightly if needed for your riding style. Always use the recommended oil type for optimal performance.
For the 2000 Yamaha DT175, each fork leg typically requires about 400cc (or 400ml) of fork oil. It's important to check the owner's manual or service manual for your specific model for any variations. Additionally, ensure you use the recommended type and viscosity of fork oil for optimal performance.
The 1985 Yamaha XJ700 Maxim requires approximately 10.6 ounces (or about 315 milliliters) of fork oil per fork leg. It's important to use the manufacturer's recommended fork oil type and viscosity, typically 10W for this model. Always refer to the service manual for specific guidelines on maintenance and oil levels.
7.4 OZ atf