Fork oil capacity-FXST/c/sb10.2 oz.or301cc FLST/C/F 11.5oz. or340cc
YES,,, MINE HAS TWO HOLES THAT LINE UP WHEN YOU TURN THE HANDLEBARS TO THE LEFT TO PUT A PADLOCK THROUGH,,,98 FATBOY.
A 1998 Harley-Davidson Fat Boy typically requires 20W fork oil for its front forks. It's important to use a high-quality motorcycle-specific fork oil to ensure proper performance and protection. Always refer to the owner's manual for specific recommendations and any potential updates on oil specifications.
41mm
10.8 each side in my 06
31" from top of yube to axle
A 1998 Harley-Davidson Sportster typically requires about 10.5 ounces (310 ml) of fork oil per leg when performing a fork oil change. It's important to use the appropriate viscosity fork oil, usually 10W or 15W, depending on your riding style and preferences. Always refer to the owner's manual for specific recommendations and any updates on maintenance procedures.
The fork oil capacity for a 1994 Harley-Davidson Softail is typically around 10 to 12 ounces per fork, depending on the specific model and any modifications. It's important to check the owner's manual or service manual for the exact specifications, as capacities can vary slightly based on the exact model and fork configuration. Always use the recommended type of fork oil for optimal performance.
how much fluid in each fork tube on 2002 harley davidson dyna supergliude
A 1994 Harley-Davidson Heritage Softail typically requires about 11.5 ounces (or approximately 340 ml) of fork oil per fork leg. It's important to use the recommended type of fork oil, which is usually a 5-weight oil, for optimal performance. Always check the service manual for specific details and any variations based on modifications or personal preferences.
Hi I would like to know how weight and oil in front fork?
To change the fork oil in a 1993 FXR Harley Davidson, first, secure the motorcycle on a stable lift to prevent it from tipping. Remove the front wheel and brake calipers, then loosen the top fork caps and remove them. Drain the old oil by inverting the forks and allowing it to flow out, then refill with the recommended type and amount of fork oil through the top, reassemble the caps, and put everything back together. Be sure to check for leaks and proper functioning before the ride.
Check your fork oil, if it's low or leaking it's probably your seals. If the oil and seals check fine, then the fork shock springs are shot.