Justin, after researching this question i found that approx 21 oz should go in each fork, but its best to measure the oil from the top of the tube to the oil level based on the shop manual
it runs about 37 horses
10.1 ounces per tube
To float on water the object should have density less than that of water. But fork have density that is much more greater than that of water.Thus, a fork sinks in water.
475ml in eack fork and you should use 10 weight oil.
2005 CR250R dry weight is 213.0 lbs
For a 1990 Kawasaki KX250, the recommended fork oil capacity is approximately 10.5 ounces (or about 310 milliliters) per leg. It's important to check the specific service manual for your bike, as variations can occur based on modifications or maintenance history. Ensure you also use the recommended viscosity of fork oil for optimal performance. Always perform a proper fork oil change procedure for the best results.
330ml per fork
vl250 fork oil quantity
4 oz. in each fork.
how much fork oil in a rm 85
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
227ml per fork