The Yamaha YBR 125 produces approximately 10.2 horsepower (7.5 kW) at 7,500 RPM. It features a single-cylinder, air-cooled engine, which contributes to its efficient performance and fuel economy, making it a popular choice for urban commuting. With its lightweight design, the YBR 125 offers a balance of power and agility for riders.
No. The Yamaha YBR 125 has a four-stroke engine.
yamaha ybr 125, How much is the fuel consumption per 01 Litter in kilometer ?
Motor oil
Oh, dude, you're really getting into the nitty-gritty with that one! The valve clearance on a Yamaha YBR 125 is typically around 0.05mm for the intake valve and 0.08mm for the exhaust valve. But hey, who's measuring anyway, right? Just ride that bike and enjoy the breeze!
Yamaha YBR 125 is available on E-Bay and also at local Yamaha retailers all over the world. Used bikes may be for sale locally. You can try to advertize for one, the price may be lower from a private person than from a used bike dealership.
To set the time on a Yamaha YBR 125, first, turn the ignition key to the "ON" position without starting the engine. Press and hold the "MODE" button until the hour digits begin to flash. Use the "SET" button to adjust the hour, then press "MODE" again to switch to minute adjustment, and use "SET" to change the minutes. Once set, press "MODE" again to confirm and exit the time-setting mode.
because maybe your valves are bent and your stem seals are leaking which means oil is going into the head thus making smoke in the exhaust. or your valve clearances are out.
Intake valve: 0.05 - 0.10mm (0.002 - 0.004inch) exhaust valve: 0.08 - 0.13mm (0.003 - 0.005inch)
The Yamaha 110 typically refers to the Yamaha YBR 110, a popular motorcycle. It usually has a fuel tank capacity of about 10 liters (2.6 gallons). This capacity allows for decent range and usability for daily commuting and short trips. Always check the specific model for the most accurate specifications, as they can vary slightly.
Valve clearances on a cold engine for the YBR 125ed when measured at top dead centre on the compression cycle are :- 0.08 - 0.12mm for the inlet 0.10 - 0.14mm for the exhaust
For a Yamaha YBR, it's recommended to use a high-quality 10W-40 motorcycle engine oil, which provides optimal performance and protection. Look for oils that meet JASO MA or MA2 specifications, as these are designed for wet clutches commonly found in motorcycles. Synthetic or semi-synthetic oils can offer better performance and longevity compared to conventional oils. Always refer to the owner's manual for specific recommendations based on your model and riding conditions.
The airport code for Brandon Airport is YBR.