to fill transmission oil to proper amount simply unscrew the "fill Screw" which is on the right side clutch cover and start filling oil (with bike straight up). Once oil starts coming out fill screw stop filling and catch oil until it stops coming out. replace screw and your set to go.
THIS PROCEDURE WILL WORK FOR ALL 2-STROKE BIKES THAT I KNOW OF.
Hope this helps.
About 1 quart
how much oil does an yamaha xt500 take
The 2001 Honda 250, has a transmission fluid capacity of six pints. The Honda motorcycle company recommends that you never overfill the transmission.
what is the part no# for a replacement transmission filter, for a 2001 Pontiac gtp grand prix . Also how much transmission fluid does it take to change.thank you Tim
I just found that my 2001 takes 6 qts atf
1ZZ-FE engine: Up to 2.9L
It calls for transmission fluid =]
The 1972 LT2 requires 700 cc of oil in the transmisison. It is stamped on the case just above the fill port.
Take it to an authorized Yamaha mechanic. This is a tricky proceedure that should not be undertaken by a backyard do-it-yourselfer.
as much as the container can hold
dexron 3
how much oil does yamaha 1994 ttr take