yes
Get a weisco 240 big bore kit
The wiring diagrams help make sure everything is wired correctly. The wiring diagram for a 1994 Yamaha Blaster can be found in the maintenance manual.
yes, but you need to make up brackets
Go steal one form Star wars!
you could always put a big bore kit on it
I know from experence u can make them go faster than 65mph depending on mods
can i make a raptor 50cc any faster. can you bore cylinder out and get more power out of it
http://www.ronniesmailorder.com/fiche_section_detail.asp?section=9654&category=ATVs&make=YAMAHA&year=1988&fveh=257 Enter this link as you see it for your diagram.
10-40 light gear oil ,any good make will do it takes 650 ml once drained
CDI BOX OR STATOR jsstang87, Also look at your ignition coil! Make sure your key way hasn't sheered off, make sure all your wiring is ok
There are several ways to make a Yamaha TTR 250 faster. One way is to bore out the cylinder creating more cubic centimeters. Another is to have straight through exhaust.
you can take the air box cover off, buy a new exaust system, get the engine bored out, stroke the engine, change out the sprockets, get a longer swingarm (for lower center of gravity), flip the wheels(make it so that the valve stem is to the insidethis makes it wider), and get better reeds im 13 i had a blaster and it went around 80. now i have a 08 300ex.