A 2-stroke engine requires adding 2-cycle oil with the gasoline.
any gas station. its called gasoline There is such a thing as a 2-stroke or a 4-stroke engine, but the fuel is the same (gasoline). The difference being that the 4-stroke engine uses regular gasoline straight from the pump while on the 2-stroke engine you have to mix 2-cycle oil with the gasoline.
Yes, it is necessary to mix oil with the gasoline in a Honda XR100R as it is a 2-stroke engine. The oil lubricates the engine components and prevents overheating. Make sure to follow the manufacturer's recommended oil-to-gas ratio for optimal performance.
2 stroke engine ? Better to mix the oil and gasoline before pouring into the tank.
If it is a 2-stroke engine, 2-cycle engine oil is added to the gasoline. If the engine is 4-stroke, regular 30W motor oil is used. To tell if your engine is 2-stroke or 4-stroke, look for a spout where oil is poured into the engine. If there is no spout, then the engine is 2-stroke and 2-cycle oil must be added to the gasoline.
It gets its lubrication from the oil mixed with the gasoline.
Use regular unleaded gasoline, and mix it with four ounces of oil per gallon of gas - BUT, how you use it depends on whether your lawn mower has a 2-stroke or 4-stroke engine. A 2-stroke engine requires 2-cycle oil to be added to the gasoline in a certain ratio. 4-stroke engines do not require the gas/oil mixture.
2 stroke engine oil which is carried by most home improvement stores and some hardware stores
Two stroke fuel uses the same gasoline but has had oil added to lubricate the internal engine parts of a 2 stroke engine which does not have oil in a sump to lubricate the engine like a 4 stroke. If you put this mix into a 4 stroke engine it will make a great deal of smoke and foul the spark plug, causing the engine to stop running. No permanent damage but definitely not recommended.
If you're talking about mixing oil to gasoline, it means 40 parts gasoline to 1 part oil. Most 2 stroke oil containers have a chart on them showing how much oil to add to different amounts of gas. For a gallon of gas, you'd add 3 ounces of oil. You're best off using synthetic oil, it won't foul your plugs if your mixture is too rich.
By putting only gasoline in a two stroke engine you can destroy it. A two stroke engine requires oil to be mixed into the gasoline to keep the moving parts lubricated. When you do not have that oil there it will not lubricate correctly and therefore scar and break the moving parts on the inside.
Ordinary 87 gasoline, the same you put in a car. It depends if it is a four stroke or two stroke engine. If the engine has a separate filler for oil then plain petrol will do. If there is no separate filler the 25 to 1 petrol /oil mix should be OK.
It depends if it is a 2 stroke or a 4 stroke. A 2 stroke engine, you mix the gas and oil. A 4 stroke engine, there are separate tanks for the oil and gas.