0
What else can I help you with?
Is the 04 gsxr 1000 on a 750 frame?
no. 600/750 are the same. 1000 is by itself
Will 2004 gsxr 1000 fairings fit on a 750?
ya. i did it on my bike. as long as its the same year
Are the front and rear fatboy solid rims the same?
bolt pattern and size is different for the pulley on the rear and the rotor on the front
Is the swing arm on a 1995 Suzuki GSXR 1100 the same as a 1995 Suzuki GSXR 750 GSXR?
yes it is as far as i know only thing is it is shorter
What is it called when a word can be spelled the same front and backward?
Palindromepalindrome eg, kayak, radar, rotor, madam, minim, deified
Why front right rotor grinding against the caliper?
your caliper is too small. you got the wrong part from the store. I had the same problem
Will fairings from a 07 gsxr fit a 05 gsxr?
Fairings from a 2007 GSXR will not fit a 2005 GSXR without modifications. While both models belong to the same GSXR family, they have different designs and mounting points. It's best to use fairings specifically designed for the 2005 model to ensure proper fit and aesthetics. Always check compatibility with your specific model and year before purchasing.
Minimum thickness Mazda 626 1998 brake rotors?
For a 1998 Mazda 626 the minimum thickness is .866 inches for the front rotor and .315 inches for the rear rotor. This is the same for the 4 and 6 cylinder versions.
Rotor removal on 2002 Trailblazer 4x4?
front or rear are the same. you have to remove the caliper and the caliper mounting bracket. you may have to tap the face of the rotor with a hammer to loosen. on the rears you may have to unadjust the rear parking brake shoes.
Why does your 2002 alero shake when you press on the break?
Warped rotor. You will have to remove it and have it trued or replaced. Replace the pads at the same time. Do both front wheels.
Is a disc brake the same as a rotor?
The rotor is the disc in the disc brake system.
How do you remove front rotor to replace on a 1993 Ford Bronco XLT?
I have the same problem can't seem to pull in the retaining ring far enough to remove hub and rotor don't know if I'm doing it right. Will update if I get it off.
