You can just raise the tank a bit without removing it altogether. It also helps to remove the air cleaner to get more working room.
float overflowing after replacing throttle cables / why?
I,m not sure but I don't think they are designed to be lubed. Call a harley dealer.
It's not necessary to remove the tank but the job will be much easier if you raise the tank up a bit and remove the air cleaner.
how do you adjust throttle bodie on 2004 harley
To lube the throttle control cable on a 2008 fuel-injected Harley Sportster, first, ensure the bike is turned off and cool. Remove the throttle cable from the throttle grip and the throttle body by loosening the cable adjusters. Use a cable lube tool or a spray lubricant designed for cables, inserting it into the cable housing and applying a light coat. Reinstall the cable, ensuring smooth operation before securing everything back in place.
Because it's a Harley, 65 HP 1940s tractor engine. R&R bike.
Remove the cables from the 1995 Harley-Davidson Road Tank motorcycle starter. Remove the retaining bolts. Reverse the process to install the new starter. The starter turns the engine over so it can start.
The stock throttle body on a 96 cubic inch Harley Davidson motor is typically around 50mm in diameter. This throttle body size is designed to provide adequate airflow for the engine’s performance needs.
No, they are smaller
There are a number of places where one can purchase a Harley Davidson battery. For instance, JP Cycles, Throttle Batteries, and Battery Mart all carry Harley Davidson batteries.
Replace them.
Of course you can.