Your mower has an electric PTO clutch that is worn out. It clutch stops working when it gets hot. Replace the PTO clutch and you should be fine. Expect to pay about $150 for the part.
More than likely it is a bad ignition coil.
Hi, Something in the drivetrain is seized/locked up. Peace, crigby
Sounds like the engine heats and the ignition fails.
When the bail for the the blade clutch is pulled back, against the force of the return spring, the blade is engaged with the engine crankshaft allowing it to spin. When the bail is released, the spring snaps back and the clutch disengages the blade from the crankshaft and stops the blade.
Restart or replace it
Gas?Spark
I ususally just Restart my computer and restart the game.. it works after that.
When you turn it off the igniton (spark) to the plug stops as the engine rolls to a stop unburnt fuel collects in the muffler and is ignited by glowing bits of deposits.
check to be sure the blades have free movement. usually if you have this problem it is caused from something stopping the blades from rotating therefore it stops the engine
Frequently while slowing down to my 1991 caravan stops. I have to turn the key and restart it or it will stop completely. Why does this happen.
Why engine stalls on 1993 Chrysler Intrepid while driving and sometimes at stops?
I changed the blade belt on my Murray mower. Now one blade stops and goes. If I lower the deck the blade stop . What did I do wrong?