You check it while it is standing straight up and the correct level is 1/2 the site glass. A little over half would be ok but no more then 3/4 and you don't want to have less then 1/2.
Hope This Helps.
To start a Suzuki Intruder 1400, first ensure the motorcycle is in neutral and the kickstand is up. Turn the ignition key to the "ON" position, then pull in the clutch lever. Press the start button to engage the starter motor. If the engine doesn’t start, check the kill switch and ensure the fuel is on.
Tire pressure 1993 800 intruder suzuki
Suzuki 1500 intruder has 1464 cc engine.
Intruder 800 parts
Yes 1998 SUZUKI VS1400GLP
where is the fuse box 1500 suzuki intruder lc 2001
1986 700cc SUZUKI INTRUDER how do you get to the battery thank you
The Suzuki Intruder has a hydraulic clutch and therefor there is no adjustment.... There is an adjustment on the clutch lever for the distance from the grip, that is all...
The front fork tubes in a 1996 Suzuki Intruder VS 800 are 40mm.
on right side of motor behind the motor cover plate
Is the kickstand still down? The kickstand must be up in order for it to go into gear without dying.
On The Floor.