On an 05 S83 which is the same bike with a few minor differences is, the wiring harnesses connections are under the seat and in the headlight. If you have a lot of wiring running behind your headlight bracket it is a safe bet is in there. .
on a 1999 sukuki 1400 intruder, its inside the left side panel, under a black plastic lid/panel held on by a phillips screw. You will have to remove the seat to get the side panel off. Im pretty sure the 96 & 99 are the same.
The spark plug gap on a 1999 Suzuki Intruder 1500 is 0.035 inch. This is a common spark plug gap size for motorcycles.
on right side of motor behind the motor cover plate
Suzki
I have a suzuki Intruder 1500lc problem. starts fine, but some times when rode for a while, it wont restart. leave for 5 mins....then starts. bateery seems fine.... any thoughts?? hoping its the decompreeion cable?? thanks
To set cam timing on a 1999 Suzuki VL1500 Intruder, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Remove the timing cover and align the timing marks on the camshaft gears with the marks on the engine case. Adjust the camshaft position as necessary, ensuring the chain or belt is properly tensioned. Finally, reassemble the timing cover and double-check the alignment before starting the engine.
Svengoolie - 1995 Alien Intruder was released on: USA: 1 May 1999 (Chicago, Illinois)
1999 SUZUKI RM125
need diagram for wheel assembly 1999 suzuki vitara
it should
Timing CHAIN on the 2.5 liter V6 in a 1999 Suzuki Grand Vitara
Where are the spark plugs on a 2001 Suzuki Vitara V-6