To change gears you use your foot to operate the lever in front of the left footpeg. If you give it a few strong taps down till it will go no further that is first gear. Half a click up from there is nuetral. Click up hard again for 2nd gear, same action again for 3rd and so on. You should pull the clutch in when doing this although most bike gearboxes will still work even if you do not use the clutch.
The only time you need to use a clutch on a motorcycle is when shifting into First, You aren't going to do any more damage to the gears than if you used the clutch. Its designed to work that way.
6 gears and neutral.
It depends on the bike if the engine of bike is heavy it has more gears. Usually 5 gears are max gears.
Shifter.
No, it is not possible to shift multiple gears simultaneously on a motorcycle. Gears must be shifted one at a time in sequence.
Shifting Gears - DJ Z-Trip album - was created in 2005.
Your bike gears may not be shifting smoothly due to issues such as cable tension, derailleur alignment, or worn-out components. It is recommended to have a professional bike mechanic inspect and adjust your gears to ensure smooth shifting.
6
To adjust Shimano gears on a mountain bike, start by shifting to the smallest chainring and cog. Then, use the barrel adjuster to fine-tune the shifting. If the chain is not shifting smoothly, adjust the cable tension by turning the barrel adjuster. Test the gears by shifting through all the gears to ensure smooth operation. If needed, repeat the process until the gears shift smoothly.
Shifting Gears - 2007 was released on: USA: 21 July 2007 (University of Texas Dobie Theater)
Shifting Gears - 2011 was released on: USA: 12 June 2011 (48 Hour Film Project)
It has 5 gears mine has 6 gears