Is asking
The spark plug gap for a Polaris Indy 500 should be set between .025 and .028 inches. A new spark plug should need no adjustments as they come preset from the factory.
Ngk br8es.
For a 2005 Polaris Sportsman 500 6x6, the recommended spark plug is the NGK BR9ES. This spark plug is designed to provide optimal performance and reliability for your ATV. Always ensure the spark plug gap is set correctly according to the manufacturer's specifications before installation.
A 1968 Ford Galaxie 500 with a 390 engine should use a spark plug such as an E3 brand spark plug. This plug should have a tapered seat with 18mm threads.
0.070
Look for it in the cylinder head, at the top of the engine. You can find it easily by following the spark plug lead or wire.
To change a spark plug you need to take off the seat and the side panel on the right side. After you do this the spark plug will be in front of the carb and on top of the engine block.
0.6mm - 0.7mm
.035 inch
it is located under the gas tank. once you remove the tank you will see a spark arrester pull that our and look down into where it was and you will see your spark plug
On a Polaris 500 4x4, the spark plug is located on the engine's cylinder head. To access it, you'll typically need to remove the plastic cover or seat, depending on the model year. The spark plug is usually positioned towards the top of the engine, near the air intake. Ensure the engine is cool before attempting to reach or replace the spark plug.
Take the seat off , then the right side cover . The spark plug will be behind the ground cable on top of the motor . Should be a special spark plug tool in your tool kit .