answersLogoWhite

0

no spark. or a faint spark. hold it. turn it over. if you get a big zap. then you have lots of spark. if you get a tiny jolt. then your losing power.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What are the signs of a bad coil?

A bad coil is usually a dead coil. The are generally thought of as on or off.


How do you repair a 1992 Suzuki GS500 motorcycle coil?

You cannot repair a motorcycle coil. Best bet is to test the coil to ensure it is bad. Your Suzuki should test between 3-6 ohms on the primary and secondary coil connections and between 18,000-30,000 when testing between the secondary and the plug wire.


What are signs and symptoms of a bad ignition coil on 1992 Chevy astro?

No electrial spark or fire at the plugs.


Motorcycle will not spark?

wiring or the coil


What are signs a fuel pump is failing on a motorcycle?

when your motorcycle leaks gas


What signs of being a bad boy might a woman attract to?

Family Feud Answers: - Tatoo - Motorcycle - Rebellious Outfit - Criminal Record


What are signs that you have a bad coil module 93' lumina 3.1?

Signs of a bad coil module in a 1993 Lumina 3.1 include difficulty starting the engine, misfiring or rough idling, and a noticeable decrease in engine performance or power. You may also experience an illuminated check engine light or hear unusual sounds from the engine. Additionally, if the vehicle stalls or has trouble maintaining speed, it could indicate a failing coil module. Testing the coil with a multimeter can provide further confirmation of its condition.


Can a bad coil drain the battery?

No, a bad coil will not drain the battery.


Will bad voltage regulator on v-star 1100 motorcycle cause motorcycle to run bad?

No


Why wont my distributor receive spark from the coil on my 1973 omega Oldsmobile?

Bad coil wire, bad coil, etc...


How do you test a motorcycle coil?

To test a motorcycle coil, first, ensure the ignition is off and disconnect the coil from the motorcycle. Use a multimeter to measure the resistance across the primary terminals; it should typically read between 0.5 to 3 ohms. Then, check the secondary terminals, which should show a higher resistance, usually between 6,000 to 15,000 ohms. If the readings are outside these ranges, the coil may be faulty and should be replaced.


Is it bad to remove the baffles of your motorcycle?

It is bad for your neighbors.