answersLogoWhite

0

Sounds like a spark plug has gone bad, if not I would be looking into the fuel system.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the Hiley formula?

A formula that is used fir driven piles


What After the Bourbon forces were driven out of Italy who became king?

Victor Emmanuel became king.


What is the formula to calculate 55.5 cents per mile?

Miles driven times 40 miles driven x 57.5 cents per mile


What is the formula to calculate mileage?

Miles driven divided by fuel used. Miles/gallon


What is the formula to determine speed of a driven pulley or sprocket using RPM and Diameter?

For a pulley, it is driver RPM x driver diameter = driven RPM x driven diameter. Keep in mind that the diameter you should use is the diameter where the belt is riding in the pulley. For instance, an A belt in an AB pulley will ride lower in the pulley than it would in an A pulley. For sprockets, the formula is the same, but replace the diameter with # teeth. It looks like this. driver rpm x # teeth of driver sprocket = driven RPM x # teeth of driven sprocket


What is the formula to calculate the ratio?

Number of teeth on driven gear divided by teeth on driven gear. Example: 40 teeth on a ring gear and 10 teeth on a pinion will be a 4.00:1 ratio.


What Narrative-driven forms became more common in Victorian poetry in part to what?

keep up with the popularity of the novel.


What happened to the Indians during manifest destiny?

The indians were seen as obstacles and they were gathered and driven from their homelands. For example, the Cherokees and Chawktaws were driven from the deep south to Oklahoma on what became known as "the trail of tears."


What is the formula to calculate gear ratio?

Number of teeth on driven gear divided by teeth on driven gear. Example: 40 teeth on a ring gear and 10 teeth on a pinion will be a 4.00:1 ratio.


What is the velocity ration of a pulley?

The velocity ratio of a pulley system is the ratio of the rotational speed of the driving pulley to the driven pulley. It indicates how the speed of the driven pulley relates to the speed of the driving pulley. The formula is: Velocity Ratio = Diameter of driving pulley / Diameter of driven pulley.


What is Lewis Hamilton's current team in Formula 1?

McLaren. The only team he has driven for in F1 since he started in 2007.


What flag indicates the safety car in formula 1?

Bernd Mayländer of Germany. He has driven the safety car since 2000.