answersLogoWhite

0

What else can I help you with?

Related Questions

What is the top speed of a Yamaha kodiak 450?

toped out it will hit about 125


What is the spark plug gap on a Yamaha kodiak 450?

.6mm or 23/1000's


What is the difference between a Yamaha Kodiak and a Big Bear?

The grizzly is a much bigger version coming in at over 600 pounds. The Kodiak will usually be somewhere around 450 pounds.


What is the first year the Yamaha YFZ 450 was produced?

2003


What type of coolant do you use in a Yamaha Kodiak 450?

For a Yamaha Kodiak 450, it is recommended to use a high-quality coolant that meets the specifications of Yamaha’s own coolant or an equivalent ethylene glycol-based coolant. Typically, a 50/50 mix of antifreeze and distilled water is suggested for optimal performance and temperature regulation. Always check the owner's manual for specific guidelines and to ensure compatibility with your model.


Why won't your 2004 Yamaha Grizzly 660 shift into park?

i have the same problem with my 06 kodiak 450. some one please help us. thanks


How fast is a 450 kodiak?

50


What is the valve clearances on 2006 Yamaha Kodiak 450?

The valve clearances for the 2006 Yamaha Kodiak 450 are 0.10 mm (0.004 inches) for the intake valves and 0.15 mm (0.006 inches) for the exhaust valves. It's important to check and adjust these clearances regularly to ensure optimal engine performance and prevent potential damage. Always consult the owner's manual or a service manual for detailed maintenance procedures.


What are valve lash specifications for a Yamaha Kodiak 450 ATV?

The valve lash specifications for a Yamaha Kodiak 450 ATV are typically set at 0.10 mm (0.004 in) for both the intake and exhaust valves when the engine is cold. It's important to check and adjust the valve clearance as part of routine maintenance to ensure optimal engine performance. Always refer to the owner's manual or service manual for the most accurate and specific information related to your model year.


How do you know if you yamaha ATV is a 400 or a 450?

how do you know if your yamaha atv is a 400 or a 450


How do you replace a drive belt on a 2005 Yamaha kodiak 450?

To replace the drive belt on a 2005 Yamaha Kodiak 450, first, ensure the ATV is on a flat surface and secure it. Remove the seat and side panels for access, then detach the belt cover by unscrewing the bolts. Slide off the old drive belt from the primary and secondary clutch sheaves, and install the new belt, ensuring it fits properly in the grooves. Finally, reassemble the cover and panels, and test the ATV to ensure the belt operates smoothly.


How fast will Yamaha Wolverine go?

if it is a Yamaha wolverine 450 it will go 61mph