0
What else can I help you with?
What is the torque settings for a yz85 2002 head and barrel?
For a 2002 Yamaha YZ85, the torque settings for the cylinder head bolts are typically around 18-20 ft-lbs (24-27 Nm). The torque for the cylinder barrel bolts is generally around 12-15 ft-lbs (16-20 Nm). Always refer to the service manual for the most accurate specifications and ensure proper torque sequence when tightening.
What are the piston rod torque specs for a 2002 Honda accord 4 cylinder?
The piston rod torque specs for a 2002 Honda accord 4 cylinder are 151 ft lbs
Do you have to take the cylinder head off to change the spark plug on a 2002 Yamaha grizzly?
No, you do not have to .....
What is the torque specs on a 2002 Kia Sedona cylinder head?
The torque specifications, for your 2002 Kia cylinder head, is 120 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
What is torque on the head bolts 2002 Cavalier 2.2?
The 2002 Cavalier 2.2 liter engine cylinder head bolt torque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
Front axel torque specs for Yamaha grizzly ATV?
For a 2002 the factory spec is 190 ft/lbs
What is the torque sequence of a Opel corsa 1.7 utility cylinderead?
2002 opel corsa 1.7 turbo diesel cylinderhead torque settings
Cylinder head bolts torque Suzuki maruti 800cc?
maruti 800 2002 tightening torques of cylinder head
What are the cyl head bolt torque specs for a 2002 Kia Optima?
2003 Kia Optima 2.4, 16 valve.what are the cylinder head bolt torque specs torque at?
What is the wheel nut torque on a 2002 Pontiac sunfire?
The lug nut torque specification for a 2002 Sunfire is 90 foot pounds. This is assuming that the rims are factory stocked, as rims with different masses may require different torque settings.
What are the torque settings for a 4x4 front hub assembly on a Dodge 2002?
160-180 ft lbs.
What are the torque specifications for a 2002 Kia Rio?
For a 2002 Kia Rio, the torque specifications vary by component. For example, the engine cylinder head bolts typically require a torque of about 65-80 lb-ft, while the main bearing caps are usually torqued to around 40-50 lb-ft. It's essential to consult the vehicle's service manual for the most accurate specifications, including any specific tightening sequences or additional torque settings.
