10w 40. I only use the oil from the canam dealer and have been fine
1 quart
dirty mary jane
Remove the header and all oil existing in the quad. There is a plg at the bottom of your quad that will let out all oil. Pass new oil through the quad and out the plug repeatedly and change your sparkplug. Start up quad with header off and let it spit all the water out. After a while you may re-install the header and put the plug back in with the new oil. Dont forget to change oil filter every 10-15 hours of riding time.
For a GTO Quad, it's recommended to use high-quality synthetic oil, typically with a viscosity rating of 5W-30 or 10W-30, depending on the climate and specific engine requirements. Always check the owner’s manual for the manufacturer's specifications to ensure optimal performance. Regular oil changes and using the right oil type will help maintain engine health and efficiency.
3.5L half way up the sight glass
1.2 qts. US page 31 owner's manual
The amount of gear oil needed for a 250 quad typically ranges from 1 to 2 quarts, depending on the specific make and model. It's essential to consult the owner's manual for the quad to get the exact specifications. Always check the oil level through the dipstick or fill plug to ensure proper filling, as overfilling can cause damage.
15-40 W JAMO MA or MA2 approved oil, or SAE 15-40 W SF or SG graded oil.
Motorcycle oil
The type needed is listed on the cap-where you place the oil.
What type oil do you put in your 2001 Peugeot 607 2.0 petrol?
Good oil