If it's the same as a 2007, the answer is (cold):
Intake: 0.07 to 0.12 mm (0.0028 to 0.0047 in, or 3 to 5 thousandths)
Exhaust: 0.07 to 0.12 mm (0.0028 to 0.0047 in, or 3 to 5 thousandths)
This info taken from the V-Star 1100 Classic 2006-2008 Service Manual.
Power:61.59 HP (45.3 kW) @ 5600 rpmTorque:85 Nm (62.69 lb-ft) @ 2500 rpm
i have a stock 2008 trx250ex and the valve clearance is 0.005 in. or 0.13mm
Valve clearance (cold)Intake valve0.09 ~ 0.13 mm(0.0035 ~ 0.0051 in)Exhaust valve0.16 ~ 0.20 mm(0.0063 ~ 0.0079 in)
You do not adjust the valve clearance on a 2008 Toyota until it has 60000 miles. At that point, you might pay for getting it checked, or check it yourself. However, Corollas normally run 100,000 miles and even longer without any need for adjusting the valve clearance.
The valve clearance for a 2008 Kawasaki Prairie 360 is typically set at 0.10-0.15 mm (0.004-0.006 inches) for the intake valves and 0.15-0.20 mm (0.006-0.008 inches) for the exhaust valves. It's important to check and adjust the valve clearance periodically to ensure optimal engine performance and longevity. Always refer to the owner's manual or service manual for specific specifications and procedures.
The valve clearance for a 2008 Kawasaki Mule 600 is typically set at 0.10 mm (0.004 in) for the intake valves and 0.15 mm (0.006 in) for the exhaust valves. It's important to consult the owner's manual or a service manual for specific adjustments and procedures, as proper clearance is crucial for optimal engine performance. Always ensure the engine is cool before making any adjustments.
The ground clearance of the 2008 Lincoln Navigator is 0 ft. 9.2 in. (9.2 in.).
The ground clearance of the 2008 Lexus IS-250 is 0 ft. 5.7 in. (5.7 in.).
The ground clearance of the 2008 Toyota Highlander is 0 ft. 8.1 in. (8.1 in.).
The ground clearance of the 2008 Suzuki SX4 is 0 ft. 6.3 in. (6.3 in.).
The ground clearance of the 2008 Volvo XC70 is 0 ft. 8.3 in. (8.3 in.).
The ground clearance of the 2008 Chevrolet Suburban is 0 ft. 9.1 in. (9.1 in.).