Valve adjustment is generally a thing of the past after the introduction of hydraulic lifters (no adjustment). In 1994 your engine should have hydraulic lifters and are not adjustable.
same as xf 105 , fuse 19
Some models that DAF Trucks have manufactured are the following: Super Spacecab, 95XF, the 45 Series, 85 Series, 65 Series, and 1000 On the Continent.
It's the one which supplies power to the engine ECM.
Have you tried the computer at the public library? Ours have automotive manuals. (Strathcona County).
To adjust the valves on an '85 Nissan pickup, first ensure the engine is cold and then remove the valve cover. Rotate the engine to align the timing marks, setting the cylinder you’re adjusting at top dead center (TDC) on the compression stroke. Use a feeler gauge to measure the gap between the rocker arm and the valve stem; adjust as necessary by loosening the lock nut and turning the adjustment screw until the correct clearance is achieved. Repeat this for each valve, then reassemble everything and check the clearance again if necessary.
* A heat riser valve
Seat height is 34.4 inches with 16.3 inches of ground clearance.
What shape is it in, what engine?
Valve cover is 85 in-lbs not ft-lbs
.003 for '83-'85 atc 200x's
cr85r does not have a powervalvle the RM , KX & KTM 85's do have a power valve hope this helps. Jon
non-return check valve