0
Sounds like the centrifugal clutch isn't engaging or the cable is broken. I just replaced my clutch the other day. Try to loosen the screws that hold the motor "head" to the shaft and see if you can shove it farther into the head. Sometimes it will slowly pull away and the cable won't engage the clutch housing. If not then you can remove the head and check the cable to see if it's broken. If the cable is fine then you will have to partially disassemble the head to get at the Clutch. Not too hard if you still have the parts break down. I went on-line to the company and found mine. Easy way is to take it in and have them do it. Also make sure the string housing is bolted tight and not just slipping. You might just take the string housing off and see if you can see the mount turn.
What else can I help you with?
How do you say weed wacker in Hebrew?
weed wacker = ויד וואקר (veed vahker)
What is the name of the part that has the string in it on a gas weed wacker?
what is the part of the weed wacker that has the string on it connected to the frane
Where can you buy a 4 cylinder weed wacker?
you wont find a 4 cylinder weed wacker ( too heavy ) but most lawn and garden dealers will carry a 4 stroke weed wacker.
How do you change the weed wacker string?
To change the weed wacker string, first, turn off the weed wacker and disconnect the spark plug. Then, remove the spool housing and take out the old string. Insert the new string following the manufacturer's instructions, and reassemble the spool housing. Finally, reconnect the spark plug and test the weed wacker.
Parts Manual Craftsman Weed Wacker?
What is the bottom cover on a weed wacker called? The bottom plastic part where the string is. just the plate
Does a eager beaver weed wacker have a carburetor?
yes
How do you move the sail in steamworks?
you use the weed wacker
What are the different names for a weed eater?
* weed wacker * mechanic sicle * green machine
What is the best weed wacker available and how much does it cost?
The best four stroke, gas powered weed wacker out there is probably the Honda HHT25SLTAT 25cc. It costs around $350 and can almost be considered a professional weed wacker. The Craftsman 79197 29cc 4-stroke trimmer is a good runner up, costing about $200. But, this weed wacker does not have a shoulder strap and it weighs 20 pounds before the gasoline is added.
How do I perform a Ryobi weed wacker string replacement?
To perform a Ryobi weed wacker string replacement, first turn off the weed wacker and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the correct length and thread it through the spool. Wind the string evenly onto the spool and reassemble the housing. Finally, reconnect the spark plug and test the weed wacker.
How do I properly install the Ryobi weed wacker line?
To properly install the Ryobi weed wacker line, first, turn off the weed wacker and disconnect the spark plug. Then, remove the spool cover and take out the old line. Cut a new line to the correct length and insert it into the spool, following the arrows for the correct winding direction. Finally, reassemble the spool cover and reconnect the spark plug before using the weed wacker.
What is the name of the weed wars theme song?
little boxes
