In the Kawasaki KLF 300 Service manual.
torque specs on head gaskets 1988 toyota corolla 4A-F
Tercel EZ
For a 1988 Chevrolet Nova with a 1.6L engine, the head bolt torque specifications are typically 65 ft-lbs (88 Nm) for the initial torque. After that, it is advisable to follow a specific sequence to ensure even tightening, often involving a final angle torque of 90 degrees. Always refer to the specific service manual for your engine variant for precise instructions.
you can go to kawasaki.com and click on my kawasaki and you should be able to get all specs needed
110 ft pounds except no 11 it is 100
If your 1988 Celebrity has the 2.5L 4 cylinder engine the torque is 25 ft lbs. If you have the 2.8L V6 engine the torque is 23 ft lbs. This per my 1988 factory service manual.
200hp and 260 torque
what are the carb settings fro a 1988 f350 pickup
Torque them to 35 pounds. then after it has run and cooled off torque them again. You can rent torque wrenches from some parts stores
i retorqued my Chevrolet heads to 90 ft. lbs. but i also found if you use the specific torque pattern the gaskets will seat better....i don't torque my intake boltsAnswer65 lb.ft.
The Adventures of Bayou Billy was created on 1988-08-12.
Cylinder Head Bolts for 1988-1997 Festiva and Aspire 1.3L I4 Engine Step one: 35-40 foot pounds Step two: 56-60 foot pounds