0
What else can I help you with?
What are the valve lash specs for a Honda ATC 70?
From the Honda spec book: Intake = .002", Exhaust .002"
Valve settings for atc 200?
.003 for '83-'85 atc 200x's
Will a rear rack off a 1983 Honda 110 atc fit a 1985 Honda 125 atc?
It should
Spark plug gap for a Honda atc 110?
.025
Does a Honda atc 110 have a place to hook up a hitch?
no
Will a 1980 ct 110 honda trail motor fit a 1975 atc 90?
i put a ct 70 motor in a atc 90. the ct 90\110 motors a vary similar so it should work just fine but i had to change the intake to the atc 90\110 intake. good luck
Can you put a front fork assembly form an 1985 Honda 200X ATC on to an 1984 Honda 110 ATC?
It is unlikely that the front fork assembly from a 1985 Honda 200X ATC will fit directly onto a 1984 Honda 110 ATC. ATC models have different frame dimensions and component designs across model years, leading to variations in mounting points and compatibility. It is recommended to find a front fork assembly specifically designed for the 1984 Honda 110 ATC for proper fit and function.
What colors did 1984 Honda atc 110 come in?
Red and Blue.
What is the valve clearance on a 1984 Honda 200S ATC?
the valve clearance is 0.002" on both intake and exhaust.
Why does your 84 atc 200s tick?
valve clearance needs to be adjusted
On a 1982 Honda 110 atc do it take gas and oil mix?
no just gas
1982 Honda atc 110 head bolt torque specs?
if your wanting to change the head the torque settings are as follows: Cylinder Head_______(1.8-2.0kg-m)[13.0-14.5ft-lb] FlyWheel___________(2.6-3.2kg-m)[18.8-23.1ft-lb]
