Depending on what made it go crooked : If it is wear you can replace bushings or bearings (might have to replace the axle shaft to.) that should fix it.
If it has a bent axle shaft then you can take the wheel off and take a pipe put it over the end of the shaft and bend it back to straight.
If you mean the toe in or out you can unbolt the swivels on the pull arms and adjust them that way.
Hope this helps.
The same as any riding mower. The following is a site which explains how the work: http://www.ehow.com/how-does_4689999_rideon-lawn-mower-work.html
The bearing or the bearing shaft of the front wheels are not aligned and the wheel balance alos could be a reason that tends to wear out the front tires.
Fix it.
To straighten the front axle of a Yard Man lawn mower, first, ensure the mower is turned off and safely positioned on a flat surface. Inspect the axle for any visible bends, and if necessary, gently bend it back into alignment using a suitable tool, like a pipe or a hammer, being cautious not to apply excessive force. Once adjusted, check the alignment by spinning the wheels to ensure they rotate freely and evenly. Finally, test the mower to confirm that it operates smoothly without any wobbling.
To release the drive wheels on a riding mower model 288220, first ensure the mower is turned off and the key is removed. Locate the release lever or switch, typically found near the rear of the mower or on the transmission housing. Pull or push the lever to the "released" position, allowing the wheels to disengage from the drive system. Always refer to the owner's manual for specific instructions related to your model.
Can I do it myself, set the timing on my riding mower.
form_title= Lawn Mower Wheels form_header= Replace the old wheels of your mower with new ones. What is the make and model of your lawn mower?*= _ [50] How old is your mower?*= _ [50] Are the wheels all the same size?*= () Yes () No
To push a Simplicity riding mower, first ensure the mower is turned off and the parking brake is engaged. Locate the release lever, usually found near the rear wheels, and disengage the drive system. Once disengaged, you can manually push the mower by grasping the handle or rear frame. Be cautious of the mower's weight and maneuvering around obstacles.
john deere smallest riding lawn mower
Being that it is a push mower, the advantage is not having to lower the handle so far to raise the front wheels when making a sharp turn-around.
yes.
What type of oil does a craftsman riding mower take