0
What else can I help you with?
Function of flywheel in reciprocating engine?
The flywheel smooths out the pulse of the power stroke and its inertia allows the crank shaft to continue rotating to bring the next piston into position to fire. Look at it like this: You could pedal your bicycle with one foot if the pedal had a flywheel on it.
Is the 6.0 Briggs and Stratton engine a four-stroke or two-stroke?
The best way to know if an engine is 2-stroke or 4-stroke, is to look for an oil spout. If the engine has an oil spout where oil has to be poured into, it is a 4-stroke. If the engine has no oil spout and the oil has to be added to the fuel, then it is a 2-stroke.
Does your lawn mower require 2 cycle engine oil?
If it is a 2-stroke engine, 2-cycle engine oil is added to the gasoline. If the engine is 4-stroke, regular 30W motor oil is used. To tell if your engine is 2-stroke or 4-stroke, look for a spout where oil is poured into the engine. If there is no spout, then the engine is 2-stroke and 2-cycle oil must be added to the gasoline.
What is a 2 stroke engine on a motorcycle?
Look up Gamma,or a RG500.
What does a crank shaft look like on a 99 old alero?
You cannot see the crankshaft without dissembling the engine. It is located inside the engine, lower part of the engine block. Pistons and connecting rods are bolted to the crankshaft.
You are trying to find the crank shaft positioner sensor?
look at the front (with the pulleys) of th engine
What does a horse look like having a stroke?
Floppy
How does an elevator shaft look?
it looks like a black square
What does a Honda city crank shaft sensor look like?
crank shaft sensor or(ckp) is look like a simple sensor.its color is black.its lenth is two inches.GILL G
How do you tell if your 50cc moped is a 2 stroke or a 4 stroke?
To determine if your 50cc moped is a 2-stroke or a 4-stroke, check the engine design and oiling system. A 2-stroke engine typically has fewer components, no separate oil reservoir, and requires mixing oil with fuel. In contrast, a 4-stroke engine has a separate oil system and usually features a valve train with camshafts and timing mechanisms. Additionally, you can consult the owner's manual or look for identifying marks on the engine.
What do engine sensors look like on a 1994 Kia Sephia?
depends on what kind of sensor you are looking for? Cam shaft, coolant temp, Mass airflow, oil pressure, etc?
How do you change a water pump impeller on a 2003 40 hp Mercury EFI 4 stroke?
Pull the lower unit look into moter leg you will see th water pump on the shaft you may have to pull the shaft to get it but from ther its just bolts on the pump.
