For a 115 4-stroke Yamaha outboard, it's recommended to use a high-quality marine gear oil, specifically Yamaha's own 4-stroke gear oil or a suitable equivalent that meets API GL-4 specifications. The viscosity should generally be 80W-90 for most operating conditions. Always check the owner's manual for specific recommendations, including any applicable service intervals and oil change procedures.
where are the spark plugs on a yamaha115 4 stroke motor
Dry weight for the 1984 model, 115 hp Yamaha 2 stroke is 350 lbs.
winterize 2013 yamaha 4 stroke twin jet boat
To change the lower unit oil in a Yamaha 115 four stroke one must obtain proper parts, the proper tools, and instructions on how to properly take apart and put together the parts.
dirty fuel injectors
The weight of a 2003 Yamaha 115 four-stroke outboard motor is approximately 363 pounds (165 kg). This weight can vary slightly depending on specific configurations and additional equipment. Always refer to the manufacturer's specifications for the most accurate information.
I just had my 2002 115 annual service done and compression was 215 to 224. The mechanic said that was a real good range.
The 1999 Yamaha 2-stroke 115 hp outboard motor typically weighs around 350 pounds (approximately 159 kg). Weight can vary slightly depending on the specific model and configuration, but this is a general estimate for that engine type. Always refer to the manufacturer's specifications for precise information.
If not using oil injection, the 115 hp Yamaha outboard will require a 50:1 ratio.
The Yamaha 115 outboard motor typically weighs around 364 pounds (165 kg) for the four-stroke model. This weight can vary slightly depending on the specific model and configuration, such as the presence of different shaft lengths or additional features. Always check the manufacturer's specifications for the most accurate information.
The dry weight for a 1998 model, 115 hp Yamaha is listed at 330 - 365 lbs., depending on the particular model.
500lb