754-0456
3/8”x29” for the main drive.
754-0257
or
754-0282 for the snow blower drive
see mtd 310440000 manual
26"
forward drive belt is a Gates # 6838 38x1/2 reverse belt is a Gates # 45x1/2
Belt , Traction drive P/N 53790 and Bel t, Auger drive P/N 3526.
For a Murray snowblower with a 3hp engine and a 20-inch width, the belt size is typically around 37 inches in length. However, it's important to check the specific model number, as variations may exist. Always consult the owner's manual or a parts supplier for the exact belt specifications to ensure a proper fit.
It depends on the snowblower, belt type and what you arer trying to achieve by making the change. The replacement pulley(s) will have to be the same shaft id as the original to start. Next make sure that there is room inside the snowblower for the new pulley. Thirdly the belt may have to change depending on the pulley size that you choose. There are many different pulley types and sizes available. Be aware of the changes that are made because they can decrease the snow throwing ability and also affect the drive speed and vice versa.
go to sears.com type in model number and serial number, most of the time they will show you a parts break down/ note belts are like every thing else you get what you pay for. a good belt will cost about $20
I wear the same size pants and my size belt was a "medium" =)
13/16" - at least that is the size for my honda 520S snow blower.
the belt length is 98 cm
what size belt do you need if waist is 36
belt size is directly proportional to weight loss, i.e if the belt size increases then the weight also increases, its an indidcation that you are putting on weight, if the belt size decreases, it indicates that you are losing your weight.
Which belt? There are thre of them.