I have a 1982 GW 1100 Interstate 20 90 18 front Michelin mu90 b16 78H rear Dunlap
100x90x15
Front tire: 110/90-19Rear tire: 130/90-17
Front tire dimensions: 3.50-19
22x11x8 is the original size.
I would read the owners manual
The book says rear tire with 200 lb load 36 psi or max load 40 psi It depends on the model i.e. the GL1200 Goldwing I/A 1984-1987 is 38 psi front and 44 psi rear. Most 'wingers' or should that be whingers? run 41 and 41 on modern tyres. The ride is firmer but the wear is greater.
Front Tire 110/90-19 Rear Tire 130/90-17 **The Honda GL1000 Goldwing uses a 4.50x 17 rear tire stock, however, many people mount the 130/90-17 instead because they consider the stock tire too thin. There are no clearance problems mounting this larger tire in it's place.**This can probably be used on some other models that use an 17" rear wheel and have a stock tire width that is close to a 130 in width. You do not want to put to wide of a tire on your bike if it does not use this size as stock. Going too wide can cause the tire to rub against parts of the bike. Please consider carefully before bidding if you are not sure this will work for you.
I'm not sure what you mean here...are you wondering what tire size is on a 1992 Honda Prelude? Or, how do you get to the spare tire? Or, how do you remove a tire?
Just a few thoughts. Overload due to, possibly poor shocks/springs, swing arm bushing, air suspension?
That depends on what size tire you have installed. Look on the driver's door post for the correct size tire for your Honda.
The stock tire size on a 1997 Honda Passport is: 225/75SR16.0
how to reset a tire sensor for a 2008 Honda civic si