Go to http://outdoorpowerinfo.com/engine_specs/briggs_valve_gaps.asp for a listing of Briggs valve clearances. You'll need your model number which will be on the engine shroud or rocker cover.
.003 exhaust-.005 intake
You don't repair compression rings you replace them.
The intake valve(s) are not fully closing.
The valves should adjusted to the following specifications: .005 - .007 in. for the intake valve and .009 - .011 in. for the exhaust valve. The valve gap is measured with the piston 1/4" past the TDC on the power stroke.
what is the torque specs and valve lash on a 24 hp Briggs
.004-.006
For the aluminum the intake valve clearance is .005 to .007 inches. exhaust valve clearance is .007 to .009 inches. Cast iron is - intake valve is .007 to .009. inches exhaust valve is .017 to .019 inches
493880S
Yes
0.004 - 0.006"
you need to hold the inner screw while tightening the outer nut
cawl sistem