The gap for the coil on a Husqvarna Rancher 55 chainsaw typically should be set at around 0.3 mm (or 0.012 inches). This gap ensures proper ignition and optimal engine performance. Always refer to the specific service manual for your model for the most accurate specifications and adjustments.
Husqvarna 55 has a 53cc engine.
If you don't want to smoke theneighbors out, you should be using a 50:1 ratio. Low smoke output and no wear on engine.
twenty years replaced in 2005
The recommended gap is .025"
Cylinder volume:53.2cc/3.2ciPower:3.3 hpMax Speed:12,500 rpmPwr/Wgt Ratio:.46 kw/kgFuel Capacity:1.27 pintBar Oil Capacity:.63 pintRec. bar lengths:18/20inchChain Pitch:3/8 inch .050Weight:11.4 lbs
the gap setting is 50 55 no more.
I have 55 Rancher, use 50:1 oil:gas mixture. Husky users manual states all their engines less than 80cc use the 50:1 ratio, all above 80cc use 33:1 ratio.
mine will run 55 mph.all stock
It is a short story about a Rancher and his wife. The story was written by Annie Proulx.
I have had mine up to 55 mph on a paved road. =)
A 99 continental does not have a coil pack, it is a coil on plug design. They cost about 55 dollars each
Code 43 refers to the coil. Code 55 is end of message.