0
acording to the original service manual that came with my 87 yz 250 the idle setting is two complete turns from dead seated position plus or minus an eighth of a turn depending on what grade of gasoline you use i use 91 octane and mine idles fine at two complete turns minus about a sixteenth of a turn uriahroot15@AOL.com let me know how it turns out and any other questions
What else can I help you with?
What is setting for idle mixture screws on 2001 Yamaha r1?
3 turns out..
Where is the idle screw in a 1999 yz 250?
twist the top of the choke, there is no idle screw on the 1999 yz250
How do you get the idle down on a Yamaha badger?
To bring the idle down on a Yamaha badger is really easy. All you have to do is adjust the fuel settings on the carburetor.
How do you adjust the idle on a 2001 YZ250 two stroke?
By turning the idle adjustment screw located near the choke lever under the carburetor. Counter-clockwise lowers it, clockwise raises it.
How do you set the idle on a 2003 Yamaha Big Bear 400?
To set the idle, adjust the carburetor.
Where is the Yamaha raider idle adjustment?
The Yamaha Raider does not have a idle adjustment based on the fact it has no carbs. It is fuel injected and auto adjusts based on the temperature and fuel delivery.
How do you adjust the idle speed on a Yamaha Razz carburetor?
there is a little screw on the back of the carb. if you loosen it, it will idle slower, tighten it, it will idle faster.
What is the Compression on a 1999 Yamaha Kodiak 400 and the idle air screw setting?
The compression ratio for a 1999 Yamaha Kodiak 400 is typically around 9.2:1. The idle air screw setting can vary based on altitude and specific tuning but is generally recommended to be set at 2 to 2.5 turns out from a lightly seated position for optimal performance. Always refer to the owner's manual or a service manual for the most accurate settings for your specific conditions.
Idle adjustment on 1991 Yamaha breeze?
I like cats.....
Where is the idle screw on a 06 ttr Yamaha?
On the side of the carb.
What would be wrong with a YZ250 that will not idle?
you need to clean ur carb use fresh gas and clean ur tank and shut off valve
Idle setting for 1995 Isuzu Rodeo 3.2lt 4wd?
u dont set the idle the ecm does the setting througt the air idle conrtol. If it wont idle u need to replace the aic motor on the th0rottle body!
