32446-95a
Harley-Davidson offers a variety of touring motorcycles, primarily within their Touring and Grand American Touring lineup. Models such as the Road King, Street Glide, and Ultra Limited are popular options. While the exact number of touring models can vary with new releases and discontinuations, Harley typically has around five to six core touring models in their lineup at any given time. For the most accurate and current information, it's best to check Harley-Davidson's official website or contact a local dealer.
On a Harley-Davidson motorcycle, the number one cylinder is typically located on the front left side of the engine when viewed from the rider's perspective. In a V-twin configuration, this means it is the left cylinder, while the right cylinder is designated as number two. This numbering convention is standard for most Harley models, including the popular Sportster and Touring lines.
It indicates that its a 5-speed transmission.
The maxi-fuse on the H-D Touring bikes is located under the left side-cover. Access by first removing the left side saddlebag and then gently prying the side-cover off. The maxi-fuse will be orange in color with the number "40" written on it.
If the frame is original the id will be on the downtube of the frame. The engine id should be on the top of the block.
The Honda Pacific Coast 800 is a touring motorcycle marketed 1989 and 1998. The engine number can be found stamped on the right side of the engine block . It should be under the cylinder head and behind the right crank case cover.
In 1992, Harley-Davidson produced approximately 10,000 units of the Ultra Classic Electra Glide model. This model was part of the Touring line and was popular among riders for its comfort and features. Exact production figures can vary, but this number provides a general idea of the production scale for that year.
The engine # is on the left side ( primary side ) of the engine just below the cylinders or on the right side of the engine just forward of the front tappet block on Big twins.
The temperature sending unit on a 307 engine is on the driver's side. It is between the spark plugs, next to the number one cylinder.
hi there but a complete engine or a bike? is it a 45 or a 74 or an 80 the engine case will tell u number is on the top left side and this is nessesary for your answer thanks
Diagnostic error code number 118 with high temperature input on a Audi A4 means that the engine coolant is not running at the right temperature. When the engine is cold, it should be warm, and when the engine is warm, the temperature should be cooler in the engine. The problem could be with the Engine Coolant Temperature sensor or the vehicle could be low on fluid.
Yes